Basic Copy Jobs - Default
Advised settings for copy jobs
Introduction
A default copy job takes two steps: feed the original face up and tap the green button.
When you change the presets or the advanced settings, it is an extended copy job.
Advised settings for copy jobs
It is best to predefine the advised settings for copy jobs you do most often.
In the table below you find the advised settings for specific copy jobs. In most cases, the
advised settings give the best results.
#
RemarksOriginal typeOriginal document
'Lines/text standard' or
'Folded lines/text'
Monochrome CAD
Drawings
For folded monochrome
originals apply 'Folded
lines/text'.
'Coloured original'Folded coloured CAD
drawing
The 'Coloured original'
mode converts all colours,
even weak ones, to
greyscale.
'Coloured original'Coloured original, like
CAD-colour, maps, busi-
ness graphics, etc.
'Coloured original'CAD drawings with marks
from marker pens
'Photo'Photos and high definition
colour prints
'Coloured original';Medium quality colour
prints
The renewed 'Dark origi-
nal' setting is best for all
CAD originals with vary-
ing background.
'Dark original'Dark originals and dark
transparent originals
'Dark original'Diazo copies / "Chinese
blueprints"
Chapter 4 - Use the Printing System 219
Advised settings for copy jobs
To Next Page
Loading...
