Oce PlotWave 360 User Manual

Print the print density chart
When to do
To influence the toner usage of your printer you can print the print density chart and
adjust the print density offset. A negative value reduces the toner usage, a positive value
increases the toner usage.
Print the print density chart
On the multi-touch user panel:
1.
Tap the 'System' thumbnail. A window opens.
2.
In the 'Setup' list in the bottom right corner of the display, select 'Test prints'. A wizard
opens.
3.
Select 'Print density chart'.
4.
Tap Ok.
A 'Print density chart' is printed.
Use the chart to change the print density in Océ Express WebTools, or via 'All settings'
on the user panel.
Chapter 8 - Support358
Print the print density chart

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches