Oce PlotWave 360 User Manual

Connect the mains supply cable and the network cable
Attention:
Make sure the power switch(B) is in 'off' position.
1.
Plug the mains supply cable in the power connection, at the back of the printer (A) (on
the left hand side).
A
B
C
2.
Plug the other side of the mains supply cable into the wall socket.
3.
Plug the network cable in the network connection (C), at the back of the printer (on the
right hand side), to connect the printer to your company network.
Chapter 2 - Get to Know the Printing System26
Connect the mains supply cable and the network cable

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches