Oce PlotWave 360 User Manual

Clear the system
When to do
On the printer user panel, you can remove all print and copy jobs from the system.
How to clear the system
On the multi-touch user panel:
1.
Tap the 'System' thumbnail in the dynamic bar . A new window opens.
2.
In the 'Setup' list in the bottom right corner of the screen, select 'Clear system'.
A wizard opens.
Note:
Make sure you have saved all the information. All print and copy jobs are removed.
3.
Follow the steps in the wizard, and complete the procedure.
Result
After you have followed the steps, the system will reboot and all print and copy jobs are
removed.
Chapter 4 - Use the Printing System276
Clear the system

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches