Enable or disable USB
Introduction
When you want to use USB as a location you have to make settings for USB first. You
can make the settings in Océ Express WebTools.
Make settings for USB
Open the 'Configuration' - 'External locations' tab. USB is present in the list of external
locations.
1.
Select 'USB', and click on the 'Edit' icon under 'Actions'. A window opens.
2.
You can change the 'Name' recognisable for the user. This name appears on the user
panel.
Note:
It is advised to leave USB in the name for best recognition.
3.
You can change the 'Description'.
4.
Under 'enabled functionalities' you can choose the functionalities you want to use for
USB.
Choose 'Print from and scan to', when you want to enable print and scan from and to
USB.
Choose 'Print from only', when you want to enable print from USB only.
Choose 'Scan to only', when you want to enable scan to USB only.
Choose 'None', when you want to disable the USB functionality.
5.
Enter the 'File name'. When you enter a generic name, for example 'scan###.*', the file
gets a unique file name. An ascending number replaces the ###.
6.
Click 'Ok' to save the settings for USB as an external location.
Result
When you enable USB and insert a USB on the user panel, the external USB location
can be used via the user panel and in Océ Express WebTools.
When you disable USB, USB cannot be used as an external location.
Chapter 3 - Define your Workflow with Océ Express WebTools152
Enable or disable USB
To Next Page
Loading...
Need help?
General
