Oce PlotWave 360 User Manual

Pause, Stop, or Clear the System
Pause, resume, or stop an active job
Introduction
When you want to pause, resume, or stop an active job there are several things you can
do.
How to 'Pause' or 'Resume' an active print job
#
IllustrationStepsAc-
tion
Tap on the active job in the dynamic bar
of the user panel.
The queue opens and 'Pause' is visible in
the dynamic bar .
Tap 'Pause' to pause the printer. The
'Pause' tile turns into a 'Resume' tile.
1.'Pause'
Tap 'Resume' in the dynamic bar to re-
sume the printer.
2.'Re-
sume'
How to stop an active job on the user panel
#
ResultActionStep
The machine stops scanning or
printing immediately: it stops in
the middle of the page.
Press the stop button.1
Your job is saved or deleted.A dialogue box appears asking you to save
the job in the Smart Inbox or to delete it.
2
The scanner releases the original.For copy and scan jobs: tap on 'Release
the original' under the Smart Access, to
release your original from the scanner.
3
Chapter 4 - Use the Printing System274
Pause, resume, or stop an active job

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches