Oce PlotWave 360 User Manual

Accounting workflow
Introduction
After the administrator configures the settings, accounting can be integrated in the
workflow.
Workflow
1.
Define an accounting dialogue and publish it.
2.
Add the Océ PlotWave 340/360 to the devices in Océ Account Console and configure
the tasks.
Note:
Try to retrieve log data every day, when the printer is On.
3.
Run the task update dialogue for the PlotWave 340/360, so the printer recognises the
dialogue.
4.
Enable accounting in Océ Express WebTools.
Workflow on the printer
1.
Create a copy, scan, or print job.
2.
Press the green button, to start the job.
A dialogue appears, asking the user to enter the required accounting information.
When the user does not enter the information, he cannot finish the job.
Chapter 7 - Account Management336
Accounting workflow

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches