Oce PlotWave 360 User Manual

Save the currently active licenses
Introduction
You can save all active licenses into one single file.
When to do
Save the currently active licenses before you start a license activation job, or when you
want to save the current license situation.
How to save the license information
Note:
For this procedure, you need to log in as a System administrator or Power user.
1.
Open the 'Support' - 'Licenses' tab.
2.
Click on the 'Save' button.
The 'Save licenses' window opens.
3.
Select a directory, and enter the new file name you want to store the licenses under.
4.
Click the 'Save' button to back up the currently active licenses.
Result
All currently active resale and demo licenses are stored into one single file.
Chapter 6 - License Management324
Save the currently active licenses

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches