Oce PlotWave 360 User Manual

RemarksActionStep
You can print documents with the follow-
ing data formats
•
- HP-GL - .hp, .hpg, .hpgl
•
- HP-GL/2 - .hp2
•
- HP RTL - .rtl
•
- CALS - .cls, .cal
•
- NIRS - .nir, .nif
•
- CalComp - .cc, .906, .907, .951, .crf,
.pci
•
- Edmics (C4) - .c4
•
- TIFF - .tif
•
- PostScript 3 - .ps (licensed)
•
- PDF - .pdf (licensed)
•
- JPEG - .jpg, .jpeg
•
- DWF - .dwf
Click on 'Add file' and use the
Browse... button to select the
file you want to print.
Repeat this action to add more
files to the job.
3
Job settings that you change in Océ Pub-
lisher Express always overrule the default
settings defined in the Océ Express
WebTools.
Select the 'Preset' and change the
'Settings' if necessary.
4
You can easily create a new Smart Inbox
when you enter a new Smart Inbox name.
In the 'Workflow' section enter
the name of the Smart Inbox you
want to print to and click 'Ok'
to send the print job to the
Smart Inbox.
5
Chapter 4 - Use the Printing System 191
Use Océ Publisher Express to send a print job

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches