Oce PlotWave 360 User Manual

4.
Tap 'Cut size' under the 'Layout' preset.
#
'Add a trailing strip''Add a leading strip'
5.
Tap 'Add a leading strip' or 'Add a trailing strip', and define the values.
6.
Make your settings and tap 'OK'.
7.
Define the number of copies and tap the green button.
Result
The document is printed with a strip attached to the top or bottom.
Chapter 4 - Use the Printing System 237
Make a copy and add a strip

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches