Oce PlotWave 360 User Manual

2.
Select the 'Scan' tile on the user panel. The scan Smart Access is visible.
3.
Select the preferred location in the Smart Access.
Tap the 'Scan' tile once more, when you want to change the settings.
4.
Tap the green button.
Note:
Tap on 'Release the original' under the Smart Access, to release your original from the
scanner.
Result
A scan to file is made, and sent to your selected location. Access your location to retrieve
the file.
Chapter 4 - Use the Printing System 257
Scan to an external location

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches