Oce PlotWave 360 User Manual

7.
Use both hands to slide the media under the metal paper guide (2) until the media is
transported automatically.
2
8.
If necessary, press the clean cut button to trim a strip of the new media roll. Press once
for a strip of approximately 20 cm, or hold the button and release it when the strip has
the desired length.
9.
Close the media drawer.
Chapter 5 - Maintain the Printing System 307
Load a media roll (position 2)

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches