Oce PlotWave 360 User Manual

•
The original support rollers (6)
Rotate the rollers to clean them.
•
The transparent contact plates (9)
Wipe off any soiled areas.
3.
Wipe all the cleaned parts once again using a dry Muslin towel.
Caution:
Watch out, not to get your fingers caught in the scanner top cover.
4.
Press the scanner top cover down gently with both hands, to close it.
Note:
Check that the left and right scanner open levers are locked into position.
Chapter 5 - Maintain the Printing System318
Clean the scanner

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches