Oce PlotWave 360 User Manual

2.
Use the media jam clearance handle to open the upper back cover.
3.
Remove any jammed printing material from the fuser section.
4.
Press the green knob on the media jam clearance handle and close the upper back cover.
Note:
Make sure you close the upper back cover properly: make sure you hear a click.
Chapter 8 - Support 351
Clear a media jam in the heater section

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches