Oce TCS400 - Page 50

50 Océ TCS400 User manual
How to configure the system from the printer operator panel
1
Press the on-line / off-line key to set the printer off-line (see ‘The on-line mode
and the off-line mode’ on page 27).
2 Use the upper softkeys to scroll to the 'Configure system' card.
3 Press the softkey below the 'Configure system' card to enter the wizard.
The screen displays the message 'Use this wizard to configure the system.'
4 Press the key for 'Next'.
The screen displays the message 'Select item.'
5 Use the lower softkeys to select 'Network settings adapter [number]'.
6 Press the key for 'Next'.
7 The screen displays 'Use DHCP server for adapter [number]?'. Use the lower
softkeys to select 'Yes' or 'No'.