Oce TCS400 - Page 63

Make copy jobs on the Océ TCS400 63
Use the settings on the 'Image' card for the following:
■ Define all the settings that deal with the image quality at the pixel level
■ Define the correct quality mode.
■ Define the correct color mode
■ Define the exposure of the light areas and the dark areas
■ Define the correct image type
■ Enable automatic background compensation
■ Enable inversion.
Note: The on-line help in the Océ Settings Editor gives a complete description
of the different settings.
Before you begin
Define the default values of the settings in the Océ Settings Editor. See the
on-line help in the Océ Settings Editor about how to define the default settings.
How to define the copy settings
1
On the home screen, press lower softkey for 'Entry to the copy settings' to enter
the settings screen.
2 Select a card with the upper softkeys.
3 Change the settings with the lower softkeys.
4 Use the arrow keys to define the settings, or the options within the settings, that
use a spin box.
A number of settings have more options than the screen can display. A number
of other settings have numeric values. Use the arrow keys to select the options
the screen cannot display. Use the arrow keys or the numeric keys to enter the
numeric settings.