Omron 3G3RX - Pulse Counter Monitor [D028]; Position Command Monitor (Absolute Position Control Mode) [D029]; Current Position Monitor (Absolute Position Control Mode) [D030]; Clock [D031], Inverter Mode [D060], Fault Frequency Monitor [D080]

4-6
4-1 Monitor Mode
4
Functions
Pulse Counter Monitor [d028]
You can monitor a total pulse count of multi-function input function pulse counter 74 (PCNT).
Display: 0 to 2147483647
Position Command Monitor (Absolute Position Control Mode) [d029]
You can monitor a position command in absolute position control mode.
Note:
This monitor is enabled only when V2 control mode selection P012 is set to "02" or "03" in
sensor vector control mode.
Display: -1073741823 to 1073741823 when HAPR is selected
-268435456 to 268435456 when APR2 is selected
Current Position Monitor (Absolute Position Control Mode) [d030]
You can monitor the current position in absolute position control mode.
Note:
This monitor is enabled only when V2 control mode selection P012 is set to "02" or "03" in
sensor vector control mode.
Display: -1073741823 to 1073741823 when HAPR is selected
-268435456 to 268435456 when APR2 is selected
Clock [d031]
Setting Date and Time for the LCD digital operator.
(Display)
2000/1/1 to 2099/12/31: Displays in increments of 1 day.
00:00 to 23:59: Displays in increments of 1 minute.
Inverter Mode [d060]
Dual ratting. Refer to b049 parameter.
(Display)
00 : Constant torque.
01 : Variable torque.
Fault Frequency Monitor [d080]
Displays the number of times the Inverter has tripped.
(Display)
0 to 65535 : Displays in increments of 1 time.