3-12
3-4 Operation
3
Operation
7- Trip Mode
1- Select the or key to select trip mode at the navigation
layer.
2- Pressing the key, the past trip information (6 trip errors) and the
warning information (1 time), that are recorded on the inverter, will be
displayed. Trip information is composed in two pages. For change from
page 1 (P1) to page 2 (P2), press the or key.
Pressing 6 times the key, it will be displayed the Warning Mode.
Note: When a trip happens, ALARM LED will be light on. Press the key to reset the inverter.
To Next Page
Loading...
