Omron 3G3RX - Monitor-B Display Mode

3-10
3-4 Operation
3
Operation
5- Monitor-B Display Mode
1- Please select the Display Mode Monitor-B using the or
key at the navigation layer.
2- After pressing the key the cursor will appear on the first row of
the four "d" group inverter parameters. Use the or key to
move between the four Monitor-B inverter parameters.
3- Pressing the key the cursor will appear on the function code of
the "d" inverter parameters selected. Use the or key to select
other function code.
• Pressing the key, the function code is selected, and then
displayed on the Monitor-B display Mode.
• Pressing the key, the change will be cancelled.