3-7
3-4 Operation
3
Operation
2- Option Mode
1- Please press , and key at the same time to
enter into the OPTION MODE. The cursor will appear in the first row of
the Option Mode menu. Use or key to move between the option
Mode menu. To return to the navigator layer, press the key.
2- Select the Language option and press the key. The cursor will
appear in the Language option value. Use the or key to select
the value to set. Press the key to store the new value.
Press the key to cancel the new value.
3- The cursor will appear in the second row. (2. Date and Time).
4- Pressing the key, it enters to the Date and Time layer. Use
the or key for moving between the Day, Month, Year, Hour,
etc...data. When the cursor is over the selected data, pressing or
key to change the value. The change will be stored after
pressing the key.
The settings available in this mode are:
1. Language
2. Date and Time
3. Read Lock
4. INV Type Select
5. R/W Storage Mode
6. Backlight Auto-off
7. Backlight Flicker
8. Operator Reset
9. Check Mode
Use or for moving between the Option Mode Menu.
And then
To Next Page
Loading...
