Omron 3G3RX - Details of Option Mode

3-8
3-4 Operation
3
Operation
3- Details of Option Mode
Note: Please do not execute the EEPROM check. Otherwise, the data (parameters/Drive program) saved in LCD
digital operator will be erased..
Item Content Setting range Default
Language Setting language
01: English
02: German
03: French
04: Spanish
05: Italian
06: Portuguese
07: Japanese
08: Chinese
09: Turkish
10: Russian
01
Date and Time
Setting Date and Time for the LCD digital
operator
Date: 2000/1/1-2099/12/31
Time: 00:00 - 23:59
Format 1-3
2009/01/01
00:00
1
Read Lock
Set "Read lock" disable to enable, in order
to protect the parameter saved in LCD
digital operator from being overwritten.
01: Enable
02: Disable
02
INV Type Select
Please select the correct INV type using
LCD digital operator. otherwise, "COM
ERROR" will be displayed automatically.
01: Type 1 (MX2, LX, RX)
02: Type 2 (JX)
01
R/W Storage Mode
Sets the number of parameter sets for
READ/WRITE mode.
01: Single
02: Quad
02
Backlight Auto-Off
When LCD digital operator remains without
key operations for 1 minute, LCD backlight
will be turned off. When a key is pressed it
will turned on.
The Backlight Auto-Off function does not
work when trip happened.
01: Off
02: 1 minute
01
Backlight Flicker
The Orange backlight will be enabled or
disabled.
01: Enable
02: Disable
01
Operator Reset
Use this function to return to default
settings of LCD digital operator.
The next items will be reset:
1- Language: English
2: Date and Time: 2009/01/01 THU 00:00
3: Time format: 01:YY/MM/DD
4: Read lock: Disable
5: R/W Storage Mode: Quad
6: Backlight Auto-Off: Off
7: Backlight Flicker: Enable
After this, date and time setting is required.
01: YES
02: NO
02
Check Mode
Check if LED and key etc. are normal or
not.
Key&Led Check, LCD
Check, EEPROM Check,
RTC Check, Serial
Loopback, Debug Mode,
Firmware Version.
-