Omron NS

Section 5 Object Operations 5-4 Editing
NS-Designer Operation Manual NS-Designer Operation Manual NS-Designer Operation Manual
5-4-5 Paste
Pastes objects that have been copied or cut to other positions or screens.
Standard Paste
Pastes the object with the same settings as the original.
1. Display the paste destination screen.
2. Select Edit - Paste or press the Paste Button on the toolbar.
Toolbar
Reference
♦ The shortcut keys for standard pasting are the Ctrl + V Keys.
R
R
e
e
f
f
e
e
r
r
e
e
n
n
c
c
e
e
Offset Paste
Offset paste is supported only for functional objects. The functional object is pasted and allocated an
address determined by a specified offset.
1. Display the paste destination screen.
2. Select Edit - Offset Paste.
3. The Offset Paste Dialog Box will be displayed. Specify the offset value.
4. Click the OK Button.
Reference
♦ The shortcut keys for offset pasting are the Ctrl + W Keys.
R
R
e
e
f
f
e
e
r
r
e
e
n
n
c
c
e
e
5-16