Omron NS User Manual

Section 2 Setup, Starting, and Exiting
NS-Designer Operation Manual
Section 2 Setup, Starting, and Exiting
The NS-Designer software must be installed in the computer when using the NS-Designer for the first time.
The NS-Designer is application software designed to be operated on Microsoft Windows 95, 98, NT, Me, 2000, or
XP.
Use the following procedure to install, start, and exit the NS-Designer when Microsoft Windows 95, 98, NT, Me,
2000, or XP is already installed in the computer.
2-1 Before Installing the NS-Designer...............................................................................................................2-1
2-2 Installing the NS-Designer...........................................................................................................................2-2
2-3 Starting the NS-Designer ...........................................................................................................................2-14
2-4 Exiting the NS-Designer ............................................................................................................................2-15
2-5 User Interface.............................................................................................................................................2-16

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)