Omron NS User Manual

Section 10 Transferring Data 10-2 Transferring Data to and from a Memory Card
NS-Designer Operation Manual
Reference
♦
The following action on the PT may be delayed while transferring the data using the Memory
card.
- Key press actions
- Updating number values and character strings
- Time for displaying a screen
R
R
e
e
f
f
e
e
r
r
e
e
n
n
c
c
e
e
3. Click the Comm. Method Button to select communications method.
(1)
Number Item Contents
1 Comms. Method
Selects the communications method to Ethernet, Serial, Mo-
dem, Controller Link, or USB.
4. Set the communications method and then click the OK Button.
5. Click the Connect Button on the Memory Card Transfer Dialog Box.
When the connection has been made, the file list will be displayed for the Memory Card.
Reference
♦ If the connection is not completed, an error message will be displayed. Click the
Connect Button again after checking the following items.
- Communications Method
- Node Address
- Cable Connection
R
R
e
e
f
f
e
e
r
r
e
e
n
n
c
c
e
e
6. Select the files or folders from the file list in the Memory Card Transfer Dialog Box to execute the
transfer, deletion, and creation of new folders.
10-32

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)