Section 2 Setup, Starting, and Exiting 2-2 Installing the NS-Designer
NS-Designer Operation Manual
NS-Designer Operation Manual
Windows 98 and Windows Me:
1. Start Windows 98 or Windows Me.
2. Connect the personal computer to the NS-series PT USB slave connector using the USB cable.
The following Add New Hardware Wizard will be displayed. Click the Next Button.
3. The following dialog box will be displayed. Select Search for the best driver for your device
(Recommended). Click the Next Button.
4. Select Specify a location only and then click the Browse Button and specify the following file.
NS-Designer installation directory
\USBHostDriver\Win98_Me\NS_DEV.inf
5. Click the Next Button.
2-11
To Next Page
Loading...
