Omron NS User Manual

Section 3 Manipulating Project Files 3-8 Project Maintenance
NS-Designer Operation Manual
Reference
♦ An existing project file can be specified as the restore destination, but the data in the existing pro-
ject file will be deleted. The alarm/event data, however, will not be deleted. The following confirma-
tion dialog box will be displayed.
♦ An error will occur if no project with the same name as the backup file exists in the restore destina-
tion. If this error occurs, create a project file with the same name as the backup file, and then re-
store the project.
R
R
e
e
f
f
e
e
r
r
e
e
n
n
c
c
e
e
3-16

Omron NS Specifications

General

Power Supply	24 VDC
Display Size	5.7 to 12.1 inches (depending on the model)
Resolution	320 x 240 to 800 x 600
Touchscreen Type	Resistive
Display Type	TFT LCD
Communication Interfaces	RS-232C, RS-422/485, Ethernet, USB
Memory	Flash memory
Operating Temperature	0 to 50°C (depending on the model)
Storage Temperature	-20°C to 60°C
Protection Rating	IP65 (front panel)
Dimensions	Varies depending on the model
Weight	Varies depending on the model
CPU	Proprietary Omron CPU (performance varies depending on the model)