Omron NX Series User Manual

• Differences Found in the Device Type
Click the OK
Button or the
Close Button.
Verifying the Device Parameters
Use the following procedure to compare the device parameters for the devices selected in the Network
Configuration Pane with those of the devices connected on the EtherNet/IP network.
The IP addresses, device types, and device parameters are compared.
1 Connect the Network Configurator to the network.
2 Click the icon of the EtherNet/IP port to verify. To select multiple nodes, press and hold the
Shift Key or the Ctrl Key while you select additional icons. (In the following example, 2 nodes
are selected: 192.168.250.1 and 192.168.250.2.)
Right-click the icon to display the pop-up menu and select Parameter – Verify
.
9 Tag Data Link Functions
9-59
NX-series EtherNet/IP Unit User's Manual (W627)
9-2 Setting Tag Data Links
9
9-2-11 Verifying Tag Data Link Parameters

Omron NX Series Specifications

General

Brand	Omron
Model	NX Series
Category	Controller
Language	English