Omron NX Series User Manual

Attached infor-
mation
Attached information 1: Connection instance No. 0 to 255
Attached information 2: IP address of the target node (example: C0A8FA01 hex for IP address of
192.168.250.1)
Precautions/
Remarks
• This event des not occur for the following cases.
The Controller is connected as a target.
A connection timeout is occurring due to a Link OFF Error with an Ethernet switch.
• If errors occur for multiple connections in one node, the event log is registered only for one connection
where an error is occurring.
14 Troubleshooting
14-37
NX-series EtherNet/IP Unit User's Manual (W627)
14-4 Checking with the Sysmac Studio, an HMI, and Instructions That Read Error
Status
14
14-4-4 Error Details

Omron NX Series Specifications

General

Programming Languages	Ladder, Structured Text, Function Block Diagram, Sequential Function Chart
Communication Ports	Ethernet, USB, RS-232C, RS-485
Memory Capacity	Varies by model
Program Memory	Varies by model
Data Memory	Varies by model
Operating Temperature	0°C to 55°C
Power Supply	24 VDC
Ethernet Ports	1 or 2 ports (depending on model)
USB Ports	1 or 2 ports (depending on model)
Dimensions	Varies by model
Weight	Varies by model