Install an Operating System (Oracle System Assistant)
Tip - If you are installing the operating system remotely using Oracle Remote System Console,
choose Devices on the KVM menu and then click CD-ROM Image to get the remote CD-ROM
to appear. Then on the Oracle System Assistant screen, click Refesh and select the CD/DVD
location.
5.
In the Select the boot disk portion of the screen, select the boot device from the
Boot disk drop-down list.
This is the device on which you install the operating system.
■
If you select a Linux distribution, the Select the boot disk portion of the screen appears.
■
If you select a Windows distribution, the Select the boot disk portion of the screen does not
appear.
Oracle System Assistant prepares the selected disk with the preinstallation environment and the
components required to install the operating system.
Caution - Data loss: The operating system installation erases the contents of the disk.
6.
To confirm your selection of the boot device, click Yes.
7.
Click View Installation Options.
The Operating System Installation Details dialog box displays the operating system and driver
software components.
Deselect any components you do not want to install. For most operating systems, all
components listed are required.
8.
To exit the dialog box, click Close.
The Install Operating System screen appears.
9.
Click the Install OS button.
10.
Respond to the prompts until the process finishes.
After the installation is complete, the server boots.
See Also
■
“Accessing Oracle System Assistant” on page 147
■
“Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)” on page 198
■
See the operating system installation documentation for your server.
120 Oracle X4 Series Servers Administration Guide • April 2016
To Next Page
Loading...
Need help?
General
