Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)
Note - You cannot configure the boot order list after switching the boot mode. A system reboot
is required to properly populate the boot order list with devices that support the chosen boot
mode.
4.
Use the up and down arrows to select Legacy BIOS Boot Mode or UEFI Boot
Mode, and then press Enter.
5.
To save the changes and exit the screen, press F10.
See Also
■
“Legacy BIOS Boot Mode and UEFI Boot Mode” on page 196
■
For BIOS screen details, see your server service manual.
200 Oracle X4 Series Servers Administration Guide • April 2016