134
DP-C405/C305/C265
FEB 2008Ver. 1.1
(37) Remove 4 Snap Rings (3545) securing the FTR
by turning over the Protect Sheet as illustrated.
Note:
When removing snap rings, exercise care not to
remove the Snap Ring holding the Backup Roller.
(38) Remove 4 FTR (3546) by turning over the
Protective Sheet as illustrated.
<Cleaning the Tension Roller, Tension Shaft and
Backup Roller>
(39) Clean the Tension Roller, Tension Shaft, and
Backup Roller with a soft cloth, saturated with
isopropyl alcohol, then clean them with a soft dry
cloth.
(40) Turn the IT Unit upside down.
Note:
When turning it upside down, hold properly by both
sides as illustrated.
To Next Page
Loading...
