Panasonic DP-C305 - Page 520

520
DP-C405/C305/C265
FEB 2008Ver. 1.1
123 Fuser Temp
Switching
(DP-C405/C354
Series Only)
Paper 1
Paper 2
Paper 2 Set the temperature of the Fuser
Unit. (Adjust the value when the
printed paper curls.)
124 Not Used
125 AC Bias Phase
FullSpeed
No
Yes
No Set the AC Bias Phase to reduce
the ultrasound emitted in the
Developer Unit. (Color full speed
mode)
126 AC Bias Phase
HalfSpeed
No
Yes
No Set the AC Bias Phase to reduce
the ultrasound emitted in the
Developer Unit. (Color half speed
mode)
127-
129
Not Used
130 Auto Print Image Ctrl No
Yes
Yes Activate the Auto Print Image
Control (APIC).
131 Drum Life Laser
(Factory use only)
Yes
132 Drum Life Charge Yes
133 Drum Temp. Charge Yes
134 Not Used
135 TDC Deve. Life
(Factory use only)
Yes
136 TDC Half Speed Yes
137 TDC Humidity Yes
138 TDC Image Control Yes
139 APIC Control Mode
(DP-C405/C354
Series Only)
Speed
Quality
Quality Set the Automatic Picture Control
(APIC) Mode for Speed
(Productivity) or Quality (Image
Quality).
In the speed mode, printing speed
is increased by skipping some of
the density control process.
140 TDC Image Case Y
(Factory use only)
Medium
141 TDC Image Case M Medium
142 TDC Image Case C Medium
143 TDC Image Case BK Medium
144 Not Used
145 FTR Control
(Factory use only)
Yes
146 FTR Device
(DP-C322 Series
Only)
Yes
147 FTR Humidity
(DP-C322 Series
Only)
Yes
148 FTR OPC Drum
(DP-C322 Series
Only)
Yes
149 FTR Deve.
(DP-C322 Series
Only)
Yes
F5 Mode
No. Item Selection Default Setting Remarks