521
DP-C405/C305/C265
FEB 2008Ver. 1.1
150 FTR STD Current Y
(Factory use only)
Medium
151 FTR STD Current M Medium
152 FTR STD Current C Medium
153 FTR STD Current BK Medium
154 Not Used
155 STR Control
(Factory use only)
Yes
156 STR Device Yes
157 STR STD Current Min
Low
Medium
High
Max
Medium Select the STR Standard Current.
Min : for Light color original
Low : for Halftone original
High: for Solid 2 color original
Max : for Solid 3 color original
158 STR T/H (Factory use only) Yes
159 Not Used
160 Discharge Control
(Factory use only)
Yes
161 Discharge T/H
Control
Yes
162 Transfer Belt Control Yes
163 Belt Motor Reverse
Ctrl
1/200
164 Drum Warning Select Off
On
On Set whether to activate the Drum
life warning.
165 TDC Recovery
Control Y
(DP-C405/C354
Series Only)
Off
1
2
3
4
5
6
7
2 Supply toner when the remaining
of the Developer gets low to
secure the performance of the
TCD sensor.
166 TDC Recovery
Control M
(DP-C405/C354
Series Only)
167 TDC Recovery
Control C
(DP-C405/C354
Series Only)
168 TDC Recovery
Control BK
(DP-C405/C354
Series Only)
169 Not Used
170 Color Reg Control Off-0
Off-1
On
On Set the Color Registration Control.
171 Skew Control Off
On
On Set the Skew Control.
When the Skew Control is
disabled, the mechanical skew
value of the LSU unit needs to be
readjusted.
F5 Mode
No. Item Selection Default Setting Remarks
To Next Page
Loading...
