522
DP-C405/C305/C265
FEB 2008Ver. 1.1
172 Color Reg Entry Min
Low
Medium
Medium Set the frequency of the Color
Registration density control.
Min (occurs most frequent),
Medium (default).
173 Paper Full Sensor No
Yes
Yes Set whether to activate the Paper
Full Sensor of the Inner Tray.
174 Mono Color Judge
Invalid
Off
On
Off
Set whether to disable Auto
Detection of monochrome or color
original.
175 Mechanical Counter1 No
BK
1C
BK+1C
2C
BK+1C+2C
4C
2C+4C
1C+2C+4C
Tota l
No (for USA/
Canada)
BK (Others)
Select the color type for the
mechanical counter 1.
176 Mechanical Counter2 No
BK
1C
BK+1C
2C
BK+1C+2C
4C
2C+4C
1C+2C+4C
Tota l
No (For USA/
Canada)
1C+2C+4C
(Others)
Select the color type for the
mechanical counter 2.
177 PS Limit Toner
Overlap
Off
On
On Set to limit Toner Overlap in PS
printing.
Recommended to set it ‘ON’.
178 PS Change CIE-
Color Use
No
Yes
No Select the default when not using
“UseCIEColor” command on the
PS command.
179 Counter Backup
(See section 3.8. for
more details)
No
Yes
No Back up the counter logs on the
SD Card.
180-
184
Not Used
F5 Mode
No. Item Selection Default Setting Remarks
To Next Page
Loading...
