671
DP-C405/C305/C265
FEB 2008Ver. 1.1
9.6.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
(1) Carefully unpack the System Console 1 or 2, and
remove all shipping Tesa Tapes.
(2) Remove 2 Screws.
(3) Remove the Rear Cover.
(4) Pull the Handles all the way out to lock them in
place.
Note:
To release the Handle, push on the Release Latch,
and push the Handle into the machine.
To Next Page
Loading...
