685
DP-C405/C305/C265
FEB 2008Ver. 1.1
(9) Install the Optional LVPS.
(10) Secure the Optional LVPS with 2 Screws
(M3 x 6).
(11) Install the Finisher IPC PC Board into connector
CN535 on the EC PC Board.
Note:
Gently insert the IPC PC Board as illustrated.
(12) Hook the Base Bracket, and secure it with
2 Screws (M4 x 6).
Note:
It is easier to align the screw holes, if you insert
the Front Screw first.
(13) Place the Finisher on the Base Bracket.
Note:
Make sure that the 2 Lock Levers Hook into the
Guide Brackets properly.
To Next Page
Loading...
