686
DP-C405/C305/C265
FEB 2008Ver. 1.1
(14) Install the Front Slide Guide Bracket, and the
Rear Slide Guide Bracket.
(15) Secure 2 Slide Guide Brackets with 2 Screws
(M4 x 6).
(16) Install the Finisher Tray Assembly.
(17) Secure the Finisher Tray Assembly with
2 Snap Rings.
(18) Connect the Finisher to the Host Machine with
the Interface Cable.
(19) Proceed with the installation of other options.
If finished, reinstall all Harnesses, and Covers.
(20) Plug the AC Power Cord, and turn the Main
Power Switch on the Back, and the Power
Switch on the Left Side of the machine to the ON
position.
(21) Reconnect the Telephone Line / LAN Cable if
disconnected
To Next Page
Loading...
