71
DP-C405/C305/C265
FEB 2008Ver. 1.1
<CCD Unit>
(21) Remove 8 Screws (X5).
(22) Remove the CCD Cover (1627).
(23) Disconnect 2 Harnesses on the CCD PC Board.
(24) Remove 2 Screws (Y23).
(25) Remove the CCD Unit (1631).
Important:
Before proceeding, make a note of the position of
the alignment pointer. If the CCD is not reinstalled
at the same position, it will affect the copy quality.
To Next Page
Loading...
