710
DP-C405/C305/C265
FEB 2008Ver. 1.1
9.14.2. Installation
CAUTION!
Turn the Power Switch on the Left Side, and the Main Power Switch on the Back of the
machine to the OFF position, and then unplug the AC Power Cord before beginning
installation.
(1) Remove 11 Screws.
(2) Remove the Rear Cover Assembly.
Caution:
If the LED on the SC PC Board is lit (ON), the
Power to the machine is still ON.
Please read the entire section "9.14.2.
Installation" once again.
(3) Remove 2 Screws.
(4) Remove the Paper Tray's Rear Cover.
(5) Remove 5 Screws.
(6) Remove the Left Cover.
To Next Page
Loading...
