735
DP-C405/C305/C265
FEB 2008Ver. 1.1
(26) Proceed with the installation of other options.
If finished, reinstall all Harnesses and Covers.
(27) If necessary, connect the Coin Vendor Harness
to the Coin Vendor.
(28) Plug the AC Power Cord, and turn the Main
Power Switch on the Back, and the Power
Switch on the Left Side of the machine to the ON
position.
(29) Reconnect the Telephone Line / LAN Cable if
disconnected.
<For DP-C322 Series>
(30) Install 2 PCB Spacers.
(31) Install the Coin Vendor PC Board as illustrated.
(32) Secure the PC Board with 2 Screws.
(33) Disconnect the Original Harness from CN504
on the EC PCB.
(34) Connect the Relay Harness (A) to CN504.
(35) Connect the Original Harness and the Relay
Harness (A).
(36) Connect the Relay Harness (A) to CN902 on
the Coin Vendor PCB.
To Next Page
Loading...
