734
DP-C405/C305/C265
FEB 2008Ver. 1.1
(19) Connect the Coin Relay Harness to CN901 on
the Coin Vendor PCB.
(20) Connect the Harness (B) and Coin Relay
Harness.
(21) Secure the Harnesses with the Harness Clamps.
(22) Connect the D-SUB Relay Harness to CN903
on the Coin Vendor PCB.
(23) Replace 1 Harness Clamp (from Medium to
Large).
(24) Connect the D-SUB Relay Harness, and Coin
Vendor Harness (C).
(25) Secure the Harnesses with 7 Harness Clamps.
To Next Page
Loading...
