Panasonic DP-C305 - Page 813

813
DP-C405/C305/C265
FEB 2008Ver. 1.1
Fig. 3-019
(1) Detach the Gear Cover [2] from the Staple
Driver [1].
(2) Remove the E-Ring [3] to detach the Side Cover
[5] of the Stapler Clincher [4].
Fig. 3-020
(3) Remove 2 E-Rings [6] to remove the Staple
Jam Releasing Gear [7], Timing Belt [8], and
Relay Gear 1 [9]. Remove the Spacer and
Spring at the back of the Staple Jam Releasing
Gear.
(4) Remove 1 Screw [10] and Spring [11] to remove
the Belt Tensioned [12].
Fig. 3-021
(5) Remove the Timing Belt [13].
(6) Remove 1 E-Ring [14] to remove the Staple
Position Check Gear [15].
[4]
[1]
[2]
[5]
[3]
[7]
[6]
[11]
[8]
[9]
[10]
[12]
[14]
[13]
[15]