Panasonic DP-C305 - Page 875

875
DP-C405/C305/C265
FEB 2008Ver. 1.1
(39) Lift up the Guide Base (14301) Assembly.
(40) Lift up the Paper Guide (14421).
(41) Remove the Exit Roller Assembly (14436) as
illustrated.
<Removing the Staple Unit>
(42) Remove 1 Screw (14443).
(43) Remove the Staple Safety Switch (14441).
(44) Release the Harness (14129) from the Harness
Clamp.
(45) Disconnect the Harness (14129).
(46) Remove 2 Screws (14021).
(47) Remove the Staple Unit (14438) Assembly.
Note:
When re-installing, ensure that Staple Unit
Assembly is installed (hooked) correctly as
illustrated.