Panasonic DP-C305 - Page 876

876
DP-C405/C305/C265
FEB 2008Ver. 1.1
(48) Remove 2 Screws (14236).
(49) Loosen 1 Screw.
(50) Remove the Staple Unit (14438).
<Removing the Finisher Interface Cable>
(51) Remove 2 Screws (14133).
(52) Release the Harness from the Harness Clamps.
(53) Disconnect 2 Harnesses and remove the
Finisher Interface Cable.
<Removing the Motors>
(54) Disconnect the Harness.
(55) Remove 2 Screws (14530).
(56) Remove the Sensor Hold Bracket (14508).
(57) Remove 2 Screws (14133).
(58) Remove the Drive Motor (14514).