Pfaff 3119 User Manual

Adjustment
130
13.48 Parameter settings
All variable machine functions are listed in the parameter list (Chapter 13.48.02). An example of
how to select the parameters and how to alter the values is given below (Chapter 13.48.01).
13.48.01 Selecting and altering parameters
Example: Switching on the needle thread monitor
● Switch on the machine.
● Select the input mode ( LED in the key is on ).
● Select the function group "200" with the appropriate plus / minus key.
● Confirm input with the "Enter" function by pressing the right plus key.
● Enter the code, see Chapter 11.03 Entering/altering the access code.
● With the corresponding plus/minus key enter e.g. parameter "205" (needle thread
monitor).
● With the corresponding plus/minus key switch on the needle thread monitor. (value "II").
● Conclude parameter input by switching to operational mode Sewing (LED in the key
goes off)
.
No
200
No VAL
205 II

Pfaff 3119 Specifications

General

Brand	Pfaff
Model	3119
Category	Sewing Machine
Language	English