Sewing
50
10.03 Error messages
If a malfunction occurs, an error code appears on the display together with short instruc-
tions. In addition the diode in the memory card slot lights up red (see arrow). An error mes-
sage may be caused by incorrect settings, defective elements or seam programs, as well as
by overload conditions.
For a description of the error codes see Chapter "13.49.01 Description of the error codes".
Eliminate the error. ●
Acknowledge the elimination of the error by pressing the ● TE key.
The diode in the memory card slot (see arrow) turns yellow again ● .
ERROR 10: 6
PRESS TE
To Next Page
Loading...
Need help?
General
