Input
73
11.10.04 Copying data onto the SD-memory card
Call up the program management, see Chapter ● 11.10.01 Calling up the program
management.
Press the left ● plus/minus keys until the corresponding menu item appears.
Confi rm the selection of the menu item with the "Enter" function by pressing the right ●
plus key.
Press the corresponding ● plus/minus keys to select the data to be copied from the
machine memory onto the SD-memory card:
MD = machine parameters
01 - 39 = variable programs
40 - 49 = special programs
ALL = all variable and special programs
The copying process is started with the "Enter" function by pressing the right ● plus key.
If the data for copying already exists, a safety enquiry appears before overwri-
ting the data. Press the right plus key to confi rm the copying process. The co-
pying process can be stopped by pressing the right minus key.
When the left ● plus/minus keys are pressed, the other menu items of the program ma-
nagement are called up.
COPY
COPY 0 1 0 2
To Next Page
Loading...
Need help?
General
