Input
52
11 .02 Selecting the function group and altering the parameters
Switch on the machine. ●
After the machine is switched on, the operational mode Sewing is activated automatically.
Select the input mode (LED in the key is on). ●
Select the desired function group with the corresponding ● plus/minus key.
On delivery only the function group "100" has free access, the other function groups are
protected from unauthorised access by a code.
Confi rm the selection of the desired function group with the “Enter” function by pressing ●
the right plus key
Select the desired parameters and alter the desired value using the corresponding ● plus/
minus key.
The value is taken over when the next parameter is called up. ●
or
When Operation mode Sewing is selected the altered value is saved and the machine ●
changes to the operational mode sewing (LED in the key goes off).
No
100
No VAL
105 1
To Next Page
Loading...
Need help?
General
