Input
58
Parameter Description
301 Program number
302 Bartack length [mm]
303 Bartack model
304 no function
(bartack model 35)
305 Width of 1st seam [mm]
306 Stitch length 1st seam [mm]
307 Secondary thread tension
1st seam
308 no function
(bartack model 35)
309 Width 2nd seam [mm]
310 Stitch length 2nd seam [mm]
311 Secondary thread tension
2nd seam
11.05.03 Creating / modifying vario programs in the bartack mode
A variable program is written with the parameters of the function group "300".
The variable program can be adapted to individual requirements by altering individual para-
meters.
As illustrated below, vario programs consist of 2 sections
1st seam (forwards seam) ●
2nd seam (reverse seam) ●
In addition to the purely geometrical data, a vario program is also defi ned with further para-
meters:
Bartack model 35, see Chapter ● 11.05.04 Buttonhole and bartack models
Secondary thread tension 1st and 2nd seam ●
Stitch length 2. seam
Width 2. seam
Bartack length
Bartack length
Width 1. seam
Stitch length 1. seam
(Bartack length
correction)
To Next Page
Loading...
Need help?
General
