Pfaff 3119 User Manual

Sewing
45
Select the stitch density. ●
If necessary adjust the buttonhole width, see ● Chapter 10.01.04 Altering the buttonhole
width and seam correction
If necessary adjust the cut width (left)/seam extension (right), see Chapter ● 10.01.05 Alte-
ring the cutting width and cutting length correction
10.01.03 Entering the knife length and cut overlap
To avoid premature wear of the cutting equipment we recommend the use of a
knife matching the buttonhole length.
Switch on the machine. ●
Select the input mode (LED in the key is on). ●
Select function group " ● 200" with the corresponding plus/minus key.
Confi rm input with the "Enter" function by pressing the right ● plus key.
Enter the code, see Chapter ● 11.03 Entering/altering the access code.
Entering the knife length
No
200
Select parameter " ● 207" with the corresponding plus/minus key.
Enter the value for the knife length of the installed knife, e.g. ● 16 mm, with the correspon-
ding plus/minus key.
No VAL
207 16 . 0

Pfaff 3119 Specifications

General

Brand	Pfaff
Model	3119
Category	Sewing Machine
Language	English